SS repair clamp plus 2T

IVA included

One-piece repair clamps have an operating range of Ø60 mm to Ø360 mm.
The two-piece repair clamps have an operating range of Ø88 mm to Ø488 mm.
The three-piece repair clamps have an operating range of Ø270 mm to Ø700 mm.
Specifications:
The repair clamps are made of stainless steel quality 304 (14301) or stainless steel quality 316 (14404).
From DN15 to DN200, 16 Bars
From DN200 to DN350, 10 Bars
Standard EPDM: Drinking water, sewage, air, acids.
EPDM 150°C: Potable water, waste water, hot air, hot water.
NBR: Natural gas, potable water, sewage, hot air, petroleum.
Silicones Drinking water, hot air (mainly used in hygienic environments).
Viton Various aggressive chemicals (available on request only).
EPDM standard continuous -20°C to 70°C, peak up to 120°C
CEPDM continuous -20°C to 120°C, peak up to 150°C
NBR continuous -15°C to 70°C, peak up to 100°C
Silicones continuous -15°C to 200°C
Viton continuous -15°C to 200°C, peak up to 250°C
To close the clamp, a tensioning plate is used on the rubber sheet (thickness, 1.5 mm) to prevent leakage in the clamp during installation.